Shop van uitersten

Gratis verzending in Nederland bij bestellingen vanaf € 75,-.

Vision TC3 HDMITP2 RJ-45 HDMI Wit kabeladapter/verloopstukje

op werkdagen voor 17:00 besteld, volgende werkdag in huis

Schrijf de eerste beoordeling van dit product

Vision’s Techconnect HDMITP2 allows HDMI signal to be transmitted long distances over standard unshielded CAT5e and CAT6 cable. Take advantage in buildings which have been flood-wired with network cable.

Seamless
The transmitter simply fits into the Techconnect AV faceplate on the wall, and the receiver plugs into the HDMI port on the display device.

Link light
A link light which comes on and stays on when the transmitter is successfully connected to the receiver. You can easily isolate if issues are with the cable or with EDID.

Auto EQ
If no image shows or the image has artefacts press the inset “Length” button on the receiver to run the auto-EQ. Pressing the button more than twice allows installers to manually step through ten gain steps.

One Power Supply
The single power supply supplied connects to the transmitter, which passes power on to the receiver via the CAT cable. If a very long or poor quality cable is used the receiver can also be powered via a standard Micro-USB connector. Any 5V2A mobile phone charger can be used.

HDCP Support
Version 1.2 of HDCP (High-bandwidth Digital Content Protection) is supported. HDCP authentication is the technology that prevents copying of digital content as it passes through cables.

EDID
EDID handshakes allow source devices to output the native display resolution. A reset button on the transmitter can be pressed to capture information from the display if the display is changed.

Easier to work with
Ethernet cable is easier to work with than HDMI cables; it has a tighter bend-radius, is thinner, easier to pull, and simple to terminate. And it is future-proof

HD Resolution
This product does not compress and supports resolutions up to 1080P (1920 x 1080) at 60 frames per second. It also supports 3D at 60Hz.

- Transmits HDMI signal over CAT (twisted pair) up to 50m (164 ft)
- Supports 1080P (1920 x 1080) and 3D (60Hz)
- Power adaptor at Transmitter only

Beschikbaarheid: In voorraad

€ 106,99

op werkdagen voor 17:00 besteld, volgende werkdag in huis

Gratis verzending *

14 dagen bedenktijd

Achteraf betalen

V.a. € 75,- gratis verzending

Onze vermelding op https://www.keurmerk.info

Details

Vision’s Techconnect HDMITP2 allows HDMI signal to be transmitted long distances over standard unshielded CAT5e and CAT6 cable. Take advantage in buildings which have been flood-wired with network cable.

Seamless
The transmitter simply fits into the Techconnect AV faceplate on the wall, and the receiver plugs into the HDMI port on the display device.

Link light
A link light which comes on and stays on when the transmitter is successfully connected to the receiver. You can easily isolate if issues are with the cable or with EDID.

Auto EQ
If no image shows or the image has artefacts press the inset “Length” button on the receiver to run the auto-EQ. Pressing the button more than twice allows installers to manually step through ten gain steps.

One Power Supply
The single power supply supplied connects to the transmitter, which passes power on to the receiver via the CAT cable. If a very long or poor quality cable is used the receiver can also be powered via a standard Micro-USB connector. Any 5V2A mobile phone charger can be used.

HDCP Support
Version 1.2 of HDCP (High-bandwidth Digital Content Protection) is supported. HDCP authentication is the technology that prevents copying of digital content as it passes through cables.

EDID
EDID handshakes allow source devices to output the native display resolution. A reset button on the transmitter can be pressed to capture information from the display if the display is changed.

Easier to work with
Ethernet cable is easier to work with than HDMI cables; it has a tighter bend-radius, is thinner, easier to pull, and simple to terminate. And it is future-proof

HD Resolution
This product does not compress and supports resolutions up to 1080P (1920 x 1080) at 60 frames per second. It also supports 3D at 60Hz.

- Transmits HDMI signal over CAT (twisted pair) up to 50m (164 ft)
- Supports 1080P (1920 x 1080) and 3D (60Hz)
- Power adaptor at Transmitter only

Poorten & interfaces

Aansluiting 1RJ-45
Aansluiting 2HDMI
Geslacht connectorMannelijk/Vrouwelijk

Design

Kleur van het productWit
MateriaalMetaal, Kunststof
Lengte snoer50 m
RoHS complianceJa
CertificeringRoHS, WEEE, CE/ EMC, and FCC compliant

Prestatie

Ondersteunde video-modi1080p
Maximum resolutie1920 x 1080 Pixels
Output current500 mA
Bandbreedte6,75 Gbit/s
Ondersteundende kabel typesCat6
Maximale refresh snelheid60 Hz

Energie

Ingangsspanning100 - 240
Stroom2

Eisen aan de omgeving

Temperatuur, in bedrijf-15 - 70 °C
Relatieve luchtvochtigheid5 - 90 procent

Verpakking

Breedte verpakking150 mm
Diepte verpakking117 mm
Hoogte verpakking77 mm
Gewicht verpakking270 g

Inhoud van de verpakking

Aantal1

Extra informatie

Productcode 4274132000009
EAN 4274132000009
Merk Vision
OEM code TC3 HDMITP2
Levertijd Op werkdagen voor 17:00 besteld, volgende werkdag in huis

Schrijf uw eigen beoordeling

U plaatst een beoordeling over: Vision TC3 HDMITP2 RJ-45 HDMI Wit kabeladapter/verloopstukje

Hoe waardeert u dit product? *

  1 ster 2 sterren 3 sterren 4 sterren 5 sterren
Prijs
Productbeschrijving

Details

Vision’s Techconnect HDMITP2 allows HDMI signal to be transmitted long distances over standard unshielded CAT5e and CAT6 cable. Take advantage in buildings which have been flood-wired with network cable.

Seamless
The transmitter simply fits into the Techconnect AV faceplate on the wall, and the receiver plugs into the HDMI port on the display device.

Link light
A link light which comes on and stays on when the transmitter is successfully connected to the receiver. You can easily isolate if issues are with the cable or with EDID.

Auto EQ
If no image shows or the image has artefacts press the inset “Length” button on the receiver to run the auto-EQ. Pressing the button more than twice allows installers to manually step through ten gain steps.

One Power Supply
The single power supply supplied connects to the transmitter, which passes power on to the receiver via the CAT cable. If a very long or poor quality cable is used the receiver can also be powered via a standard Micro-USB connector. Any 5V2A mobile phone charger can be used.

HDCP Support
Version 1.2 of HDCP (High-bandwidth Digital Content Protection) is supported. HDCP authentication is the technology that prevents copying of digital content as it passes through cables.

EDID
EDID handshakes allow source devices to output the native display resolution. A reset button on the transmitter can be pressed to capture information from the display if the display is changed.

Easier to work with
Ethernet cable is easier to work with than HDMI cables; it has a tighter bend-radius, is thinner, easier to pull, and simple to terminate. And it is future-proof

HD Resolution
This product does not compress and supports resolutions up to 1080P (1920 x 1080) at 60 frames per second. It also supports 3D at 60Hz.

- Transmits HDMI signal over CAT (twisted pair) up to 50m (164 ft)
- Supports 1080P (1920 x 1080) and 3D (60Hz)
- Power adaptor at Transmitter only

Poorten & interfaces

Aansluiting 1RJ-45
Aansluiting 2HDMI
Geslacht connectorMannelijk/Vrouwelijk

Design

Kleur van het productWit
MateriaalMetaal, Kunststof
Lengte snoer50 m
RoHS complianceJa
CertificeringRoHS, WEEE, CE/ EMC, and FCC compliant

Prestatie

Ondersteunde video-modi1080p
Maximum resolutie1920 x 1080 Pixels
Output current500 mA
Bandbreedte6,75 Gbit/s
Ondersteundende kabel typesCat6
Maximale refresh snelheid60 Hz

Energie

Ingangsspanning100 - 240
Stroom2

Eisen aan de omgeving

Temperatuur, in bedrijf-15 - 70 °C
Relatieve luchtvochtigheid5 - 90 procent

Verpakking

Breedte verpakking150 mm
Diepte verpakking117 mm
Hoogte verpakking77 mm
Gewicht verpakking270 g

Inhoud van de verpakking

Aantal1
Extra informatie

Extra informatie

Productcode 4274132000009
EAN 4274132000009
Merk Vision
OEM code TC3 HDMITP2
Levertijd Op werkdagen voor 17:00 besteld, volgende werkdag in huis
Beoordelen

Schrijf uw eigen beoordeling

U plaatst een beoordeling over: Vision TC3 HDMITP2 RJ-45 HDMI Wit kabeladapter/verloopstukje

Hoe waardeert u dit product? *

  1 ster 2 sterren 3 sterren 4 sterren 5 sterren
Prijs