Shop van uitersten

Gratis verzending in Nederland bij bestellingen vanaf € 75,-.

Netgear GS110TP

op werkdagen voor 17:00 besteld, volgende werkdag in huis

Schrijf de eerste beoordeling van dit product

Small, Yet Powerful Gigabit Smart Switch Packed with Advanced Features

Joining NETGEAR’s ProSafe® family of Smart Switches with high performance and cost efficiency, this 10-port Gigabit Smart Switch is packed with powerful features capable of enhancing any type of business network. The GS110TP is designed for customers who need a low port density solution with the combination of Gigabit speed and PoE capability. The GS110TP comes with 8 dedicated 10/100/1000 Mbps copper ports to connect to your end devices and two additional Gigabit Fiber ports for uplinks with greater distance. With PoE capability on all 8 copper ports, the GS110TP can automatically detect PoE on the end devices and dynamically manage power assignments and priority. It is capable of delivering up to 15.4W of power to devices such as wireless access points, IP phones and IP cameras, providing flexibility and ease of deployment to your network. The GS110TP comes with a comprehensive set of features, such as enhanced VLAN and QoS, access control lists (ACL), 802.1x port authentication, rate limiting and IGMP snooping and many more, to provide businesses with networks that are geared for growth while ensuring performance and reliability. With the fanless design and compact form factor, the GS110TP offers quiet operation and is suitable for deployments in any type of environment, especially the ones which are sensitive to noise.

PoE Power Management

GS110TP offers useful PoE power management features to help you better control and monitor your power resource. The PoE timer can help turn off the PoE ports during certain times of the day so that your network can be more secure as well as energy efficient. It can also set prioritization on power usage so that specified ports are always guaranteed to get the power first if total power required exceeds the total power budget. The power will be assigned to the PoE ports dynamically depending on the actual power need of the individual network devices so that you don’t need to do any calculation. The PoE LED on the front panel will light up if the PoE usage is reaching the threshold, meaning that insufficient PoE resource is left for powering up additional ports.

NETGEAR Green
- Up to 70% power savings compared to the non-Green version
- Auto power-down mode saves energy when port is not in use
- Cable length detection reduces power usage when network cable is shorter than 10 meters

Advanced Quality of Service (QoS)

Priority queuing ensures high-priority traffic gets delivered efficiently, even during congestion from high-traffic bursts. Companies implementing network telephony or video conferencing, for example, need to be able to prioritize such voice and video traffic and other real-time applications over less latency-sensitive traffic to ensure reliability and quality. The ability to prioritize traffic ensures quality of latency-sensitive services and applications despite increasing traffic loads. The GS110TP provides an extensive set of QoS features:

- 802.1p-based prioritization
- Layer 3-based prioritization
- Rate limiting

Advanced Security

The GS110TP provides more robust security. This includes:
- 802.1x for authentication
- ACL filtering to permit or deny traffic based on MAC or IP addresses

Usability Enhancements

The GS110TP is a powerful switch, yet very ease to manage. It comes with many usability enhancements to help customers fully utilize the features for a more optimized and secure network. For example, the Auto Voice VLAN and Auto Video features will assist customers to easily set up VoIP or IP surveillance networks with a couple of simple steps. You don’t need to be an IT professional to set up VoIP or IP surveillance. Security is critical for business networks. However, not everyone knows how to set up a secure network. The ACL Wizards on the GS110TP will guide even naïve users through the setup of access control and address filtering.

Centralized Management via the New Smart Control Center

With multiple switches in the network, managing configurations on each switch and upgrading firmware becomes a big challenge. NETGEAR’s Smart Control Center that comes with the GS110TP and many other Smart switch models can help make this task much easier and simpler. It can perform discovery of the switches on your network, push configuration and firmware updates to multiple selected switches at once, and can even schedule when the tasks should be performed.

Beschikbaarheid: In voorraad

€ 136,50

op werkdagen voor 17:00 besteld, volgende werkdag in huis

Gratis verzending *

14 dagen bedenktijd

Achteraf betalen

V.a. € 75,- gratis verzending

Onze vermelding op https://www.keurmerk.info

Details

Small, Yet Powerful Gigabit Smart Switch Packed with Advanced Features

Joining NETGEAR’s ProSafe® family of Smart Switches with high performance and cost efficiency, this 10-port Gigabit Smart Switch is packed with powerful features capable of enhancing any type of business network. The GS110TP is designed for customers who need a low port density solution with the combination of Gigabit speed and PoE capability. The GS110TP comes with 8 dedicated 10/100/1000 Mbps copper ports to connect to your end devices and two additional Gigabit Fiber ports for uplinks with greater distance. With PoE capability on all 8 copper ports, the GS110TP can automatically detect PoE on the end devices and dynamically manage power assignments and priority. It is capable of delivering up to 15.4W of power to devices such as wireless access points, IP phones and IP cameras, providing flexibility and ease of deployment to your network. The GS110TP comes with a comprehensive set of features, such as enhanced VLAN and QoS, access control lists (ACL), 802.1x port authentication, rate limiting and IGMP snooping and many more, to provide businesses with networks that are geared for growth while ensuring performance and reliability. With the fanless design and compact form factor, the GS110TP offers quiet operation and is suitable for deployments in any type of environment, especially the ones which are sensitive to noise.

PoE Power Management

GS110TP offers useful PoE power management features to help you better control and monitor your power resource. The PoE timer can help turn off the PoE ports during certain times of the day so that your network can be more secure as well as energy efficient. It can also set prioritization on power usage so that specified ports are always guaranteed to get the power first if total power required exceeds the total power budget. The power will be assigned to the PoE ports dynamically depending on the actual power need of the individual network devices so that you don’t need to do any calculation. The PoE LED on the front panel will light up if the PoE usage is reaching the threshold, meaning that insufficient PoE resource is left for powering up additional ports.

NETGEAR Green
- Up to 70% power savings compared to the non-Green version
- Auto power-down mode saves energy when port is not in use
- Cable length detection reduces power usage when network cable is shorter than 10 meters

Advanced Quality of Service (QoS)

Priority queuing ensures high-priority traffic gets delivered efficiently, even during congestion from high-traffic bursts. Companies implementing network telephony or video conferencing, for example, need to be able to prioritize such voice and video traffic and other real-time applications over less latency-sensitive traffic to ensure reliability and quality. The ability to prioritize traffic ensures quality of latency-sensitive services and applications despite increasing traffic loads. The GS110TP provides an extensive set of QoS features:

- 802.1p-based prioritization
- Layer 3-based prioritization
- Rate limiting

Advanced Security

The GS110TP provides more robust security. This includes:
- 802.1x for authentication
- ACL filtering to permit or deny traffic based on MAC or IP addresses

Usability Enhancements

The GS110TP is a powerful switch, yet very ease to manage. It comes with many usability enhancements to help customers fully utilize the features for a more optimized and secure network. For example, the Auto Voice VLAN and Auto Video features will assist customers to easily set up VoIP or IP surveillance networks with a couple of simple steps. You don’t need to be an IT professional to set up VoIP or IP surveillance. Security is critical for business networks. However, not everyone knows how to set up a secure network. The ACL Wizards on the GS110TP will guide even naïve users through the setup of access control and address filtering.

Centralized Management via the New Smart Control Center

With multiple switches in the network, managing configurations on each switch and upgrading firmware becomes a big challenge. NETGEAR’s Smart Control Center that comes with the GS110TP and many other Smart switch models can help make this task much easier and simpler. It can perform discovery of the switches on your network, push configuration and firmware updates to multiple selected switches at once, and can even schedule when the tasks should be performed.

Beheerfuncties

Switch typeManaged
Quality of Service (QoS)Ja
Multicast-ondersteuningJa

Poorten & interfaces

Aantal basis-switching RJ-45 Ethernet-poorten8
Type basis-switching RJ-45 Ethernet-poortenGigabit Ethernet (10/100/1000)
Aantal SFP-poorten2
Copper ethernet cabling technologie1000BASE-T, 100BASE-TX, 10BASE-T

Netwerk

NetwerkstandaardIEEE 802.3ab, IEEE 802.3af, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Full duplexJa
DatastroombeheerJa
Port mirroringJa
VerbindingsaggregatieJa
Broadcast stormbeheerJa
Rate limitingJa
DHCP clientJa
IGMP snoopingJa
Spanning tree protocolJa

Data-uitwisseling

MAC-adrestabel4000 entries
Ondersteunde data-overdrachtsnelheden10/100/1000Base-T/SFP
Store-and-forwardJa
Max. overdrachtssnelheid20 Gbit/s
Jumbo Frames ondersteuningJa

Beveiliging

Access Control List (ACL)Ja

Protocollen

Datalink-protocollenEthernet, Fast Ethernet, Gigabit Ethernet

Design

Kleur van het productZwart

Prestatie

Packet buffergeheugen0,5 MB
Mean time between failures (MTBF)157004 uur

Energie

Typisch stroomverbruik59,3W
Stroom1,25A
Ingangsspanning48V

Power over Ethernet (PoE)

Power over Ethernet (PoE)Ja

Eisen aan de omgeving

Temperatuur, in bedrijf0 - 50 °C
Temperatuur bij opslag-20 - 70 °C
Relatieve luchtvochtigheid, in bedrijf0 - 90 procent
Luchtvochtigheid bij opslag0 - 95 procent
Hoogte, in bedrijf0 - 3000m
Hoogte bij opslag0 - 3000m

Gewicht en omvang

Gewicht700g

Overige specificaties

Latentie4 μs
Afmetingen (BxDxH)236 x 101.6 x 27 mm
VerbindingstechnologieBedraad
Elektromagnetische emissieCE mark, FCC Part 15 Class A, VCCI Class A, C-Tick

Extra informatie

EAN 0606449103793
Merk Netgear
OEM code GS110TP-200EUS
Levertijd Op werkdagen voor 17:00 besteld, volgende werkdag in huis

Schrijf uw eigen beoordeling

U plaatst een beoordeling over: Netgear GS110TP

Hoe waardeert u dit product? *

  1 ster 2 sterren 3 sterren 4 sterren 5 sterren
Prijs
Productbeschrijving

Details

Small, Yet Powerful Gigabit Smart Switch Packed with Advanced Features

Joining NETGEAR’s ProSafe® family of Smart Switches with high performance and cost efficiency, this 10-port Gigabit Smart Switch is packed with powerful features capable of enhancing any type of business network. The GS110TP is designed for customers who need a low port density solution with the combination of Gigabit speed and PoE capability. The GS110TP comes with 8 dedicated 10/100/1000 Mbps copper ports to connect to your end devices and two additional Gigabit Fiber ports for uplinks with greater distance. With PoE capability on all 8 copper ports, the GS110TP can automatically detect PoE on the end devices and dynamically manage power assignments and priority. It is capable of delivering up to 15.4W of power to devices such as wireless access points, IP phones and IP cameras, providing flexibility and ease of deployment to your network. The GS110TP comes with a comprehensive set of features, such as enhanced VLAN and QoS, access control lists (ACL), 802.1x port authentication, rate limiting and IGMP snooping and many more, to provide businesses with networks that are geared for growth while ensuring performance and reliability. With the fanless design and compact form factor, the GS110TP offers quiet operation and is suitable for deployments in any type of environment, especially the ones which are sensitive to noise.

PoE Power Management

GS110TP offers useful PoE power management features to help you better control and monitor your power resource. The PoE timer can help turn off the PoE ports during certain times of the day so that your network can be more secure as well as energy efficient. It can also set prioritization on power usage so that specified ports are always guaranteed to get the power first if total power required exceeds the total power budget. The power will be assigned to the PoE ports dynamically depending on the actual power need of the individual network devices so that you don’t need to do any calculation. The PoE LED on the front panel will light up if the PoE usage is reaching the threshold, meaning that insufficient PoE resource is left for powering up additional ports.

NETGEAR Green
- Up to 70% power savings compared to the non-Green version
- Auto power-down mode saves energy when port is not in use
- Cable length detection reduces power usage when network cable is shorter than 10 meters

Advanced Quality of Service (QoS)

Priority queuing ensures high-priority traffic gets delivered efficiently, even during congestion from high-traffic bursts. Companies implementing network telephony or video conferencing, for example, need to be able to prioritize such voice and video traffic and other real-time applications over less latency-sensitive traffic to ensure reliability and quality. The ability to prioritize traffic ensures quality of latency-sensitive services and applications despite increasing traffic loads. The GS110TP provides an extensive set of QoS features:

- 802.1p-based prioritization
- Layer 3-based prioritization
- Rate limiting

Advanced Security

The GS110TP provides more robust security. This includes:
- 802.1x for authentication
- ACL filtering to permit or deny traffic based on MAC or IP addresses

Usability Enhancements

The GS110TP is a powerful switch, yet very ease to manage. It comes with many usability enhancements to help customers fully utilize the features for a more optimized and secure network. For example, the Auto Voice VLAN and Auto Video features will assist customers to easily set up VoIP or IP surveillance networks with a couple of simple steps. You don’t need to be an IT professional to set up VoIP or IP surveillance. Security is critical for business networks. However, not everyone knows how to set up a secure network. The ACL Wizards on the GS110TP will guide even naïve users through the setup of access control and address filtering.

Centralized Management via the New Smart Control Center

With multiple switches in the network, managing configurations on each switch and upgrading firmware becomes a big challenge. NETGEAR’s Smart Control Center that comes with the GS110TP and many other Smart switch models can help make this task much easier and simpler. It can perform discovery of the switches on your network, push configuration and firmware updates to multiple selected switches at once, and can even schedule when the tasks should be performed.

Beheerfuncties

Switch typeManaged
Quality of Service (QoS)Ja
Multicast-ondersteuningJa

Poorten & interfaces

Aantal basis-switching RJ-45 Ethernet-poorten8
Type basis-switching RJ-45 Ethernet-poortenGigabit Ethernet (10/100/1000)
Aantal SFP-poorten2
Copper ethernet cabling technologie1000BASE-T, 100BASE-TX, 10BASE-T

Netwerk

NetwerkstandaardIEEE 802.3ab, IEEE 802.3af, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Full duplexJa
DatastroombeheerJa
Port mirroringJa
VerbindingsaggregatieJa
Broadcast stormbeheerJa
Rate limitingJa
DHCP clientJa
IGMP snoopingJa
Spanning tree protocolJa

Data-uitwisseling

MAC-adrestabel4000 entries
Ondersteunde data-overdrachtsnelheden10/100/1000Base-T/SFP
Store-and-forwardJa
Max. overdrachtssnelheid20 Gbit/s
Jumbo Frames ondersteuningJa

Beveiliging

Access Control List (ACL)Ja

Protocollen

Datalink-protocollenEthernet, Fast Ethernet, Gigabit Ethernet

Design

Kleur van het productZwart

Prestatie

Packet buffergeheugen0,5 MB
Mean time between failures (MTBF)157004 uur

Energie

Typisch stroomverbruik59,3W
Stroom1,25A
Ingangsspanning48V

Power over Ethernet (PoE)

Power over Ethernet (PoE)Ja

Eisen aan de omgeving

Temperatuur, in bedrijf0 - 50 °C
Temperatuur bij opslag-20 - 70 °C
Relatieve luchtvochtigheid, in bedrijf0 - 90 procent
Luchtvochtigheid bij opslag0 - 95 procent
Hoogte, in bedrijf0 - 3000m
Hoogte bij opslag0 - 3000m

Gewicht en omvang

Gewicht700g

Overige specificaties

Latentie4 μs
Afmetingen (BxDxH)236 x 101.6 x 27 mm
VerbindingstechnologieBedraad
Elektromagnetische emissieCE mark, FCC Part 15 Class A, VCCI Class A, C-Tick
Extra informatie

Extra informatie

EAN 0606449103793
Merk Netgear
OEM code GS110TP-200EUS
Levertijd Op werkdagen voor 17:00 besteld, volgende werkdag in huis
Beoordelen

Schrijf uw eigen beoordeling

U plaatst een beoordeling over: Netgear GS110TP

Hoe waardeert u dit product? *

  1 ster 2 sterren 3 sterren 4 sterren 5 sterren
Prijs