Shop van uitersten

Gratis verzending in Nederland bij bestellingen vanaf € 75,-.

DELL PowerEdge Smart-UPS 2700 W/3000VA 3000VA 9AC-uitgang(en) Rackmontage Zwart, Roestvrijstaal UPS

Schrijf de eerste beoordeling van dit product

Niet op voorraad

- Audible alarms
Provides notification of changing utility power and UPS power conditions
- Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
- Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- Boost and Trim Automatic Voltage Regulation (AVR)
Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
- Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
- High online efficiency
Reduces utlility costs, generates less heat.
- Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- Sequenced network shutdown and reboot
Customize network shutdown and reboot sequence of connected servers and UPSs.
- Serial connectivity
Provides management of the UPS via a serial port.
- Serial connectivity
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
- Cold-start capable
Provides temporary battery power when the utility power is out.
- Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
- Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
- LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
- Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
- USB connectivity
Provides management of the UPS via a USB port (not available on all models).
- User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
- Single switched outlet group
Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
- StruxureWare Central compatible
Enables centralized management via StruxureWare Central.
- Disconnected battery notification
Warns when a battery is not available to provide backup power.
- Network manageable
Provides remote power management of the UPS over the network.
- Outlet group control
Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
- Energy meter
Provides actual kilowatt hours of usage for energy conscious users.
- Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
- Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
- Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
- Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
- Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
- Wide input voltage range
Designed for harsh electrical environments to save battery life.
- Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.

Beschikbaarheid: Niet op voorraad

€ 1.786,50

Gratis verzending *

14 dagen bedenktijd

Achteraf betalen

V.a. € 75,- gratis verzending

Onze vermelding op https://www.keurmerk.info

Details

- Audible alarms
Provides notification of changing utility power and UPS power conditions
- Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
- Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- Boost and Trim Automatic Voltage Regulation (AVR)
Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
- Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
- High online efficiency
Reduces utlility costs, generates less heat.
- Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- Sequenced network shutdown and reboot
Customize network shutdown and reboot sequence of connected servers and UPSs.
- Serial connectivity
Provides management of the UPS via a serial port.
- Serial connectivity
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
- Cold-start capable
Provides temporary battery power when the utility power is out.
- Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
- Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
- LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
- Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
- USB connectivity
Provides management of the UPS via a USB port (not available on all models).
- User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
- Single switched outlet group
Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
- StruxureWare Central compatible
Enables centralized management via StruxureWare Central.
- Disconnected battery notification
Warns when a battery is not available to provide backup power.
- Network manageable
Provides remote power management of the UPS over the network.
- Outlet group control
Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
- Energy meter
Provides actual kilowatt hours of usage for energy conscious users.
- Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
- Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
- Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
- Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
- Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
- Wide input voltage range
Designed for harsh electrical environments to save battery life.
- Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.

Energie

Output power capacity3000 VA
Uitgangsvermogen2700 W
Ingang operation voltage (min)220 V
Ingang operation voltage (max)240 V
Uitgang operation voltage (min)220 V
Uitgang operation voltage (max)240 V
Voeding, frequentie ingang47/63
Emergency Power Off (EPO)Ja

Poorten & interfaces

StopcontacttypesC13 stekker, C19 stekker
StekkerC20 stekker
Aantal AC uitgangen9 AC-uitgang(en)
Aantal USB 2.0-poorten1
Seriële poort(en)1

Accu/Batterij

Type accu/batterijRBC43
Typische backup tijd op halve lading11 min
Typische backup tijd op volledige lading3 min

Design

VormfactorRackmontage
Kleur van het productZwart, Roestvrijstaal
Rackcapaciteit2U

Prestatie

GolfvormSinus

Certificaten

CertificeringC-tick, CE, EN62040-1, EN62040-2, EN60950-1, GOST, VDE

Gewicht en omvang

Breedte683 mm
Diepte480 mm
Hoogte86 mm
Gewicht44,3 kg

Extra informatie

Productcode 5415247078432
EAN 5415247078432
Merk DELL
OEM code A7522112
Levertijd Niet op voorraad

Schrijf uw eigen beoordeling

U plaatst een beoordeling over: DELL PowerEdge Smart-UPS 2700 W/3000VA 3000VA 9AC-uitgang(en) Rackmontage Zwart, Roestvrijstaal UPS

Hoe waardeert u dit product? *

  1 ster 2 sterren 3 sterren 4 sterren 5 sterren
Prijs
Productbeschrijving

Details

- Audible alarms
Provides notification of changing utility power and UPS power conditions
- Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
- Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- Boost and Trim Automatic Voltage Regulation (AVR)
Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
- Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
- High online efficiency
Reduces utlility costs, generates less heat.
- Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- Sequenced network shutdown and reboot
Customize network shutdown and reboot sequence of connected servers and UPSs.
- Serial connectivity
Provides management of the UPS via a serial port.
- Serial connectivity
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
- Cold-start capable
Provides temporary battery power when the utility power is out.
- Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
- Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
- LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
- Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
- USB connectivity
Provides management of the UPS via a USB port (not available on all models).
- User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
- Single switched outlet group
Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
- StruxureWare Central compatible
Enables centralized management via StruxureWare Central.
- Disconnected battery notification
Warns when a battery is not available to provide backup power.
- Network manageable
Provides remote power management of the UPS over the network.
- Outlet group control
Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
- Energy meter
Provides actual kilowatt hours of usage for energy conscious users.
- Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
- Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
- Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
- Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
- Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
- Wide input voltage range
Designed for harsh electrical environments to save battery life.
- Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.

Energie

Output power capacity3000 VA
Uitgangsvermogen2700 W
Ingang operation voltage (min)220 V
Ingang operation voltage (max)240 V
Uitgang operation voltage (min)220 V
Uitgang operation voltage (max)240 V
Voeding, frequentie ingang47/63
Emergency Power Off (EPO)Ja

Poorten & interfaces

StopcontacttypesC13 stekker, C19 stekker
StekkerC20 stekker
Aantal AC uitgangen9 AC-uitgang(en)
Aantal USB 2.0-poorten1
Seriële poort(en)1

Accu/Batterij

Type accu/batterijRBC43
Typische backup tijd op halve lading11 min
Typische backup tijd op volledige lading3 min

Design

VormfactorRackmontage
Kleur van het productZwart, Roestvrijstaal
Rackcapaciteit2U

Prestatie

GolfvormSinus

Certificaten

CertificeringC-tick, CE, EN62040-1, EN62040-2, EN60950-1, GOST, VDE

Gewicht en omvang

Breedte683 mm
Diepte480 mm
Hoogte86 mm
Gewicht44,3 kg
Extra informatie

Extra informatie

Productcode 5415247078432
EAN 5415247078432
Merk DELL
OEM code A7522112
Levertijd Niet op voorraad
Beoordelen

Schrijf uw eigen beoordeling

U plaatst een beoordeling over: DELL PowerEdge Smart-UPS 2700 W/3000VA 3000VA 9AC-uitgang(en) Rackmontage Zwart, Roestvrijstaal UPS

Hoe waardeert u dit product? *

  1 ster 2 sterren 3 sterren 4 sterren 5 sterren
Prijs